Sunday, July 17, 2011

Gunwales and Epoxy

I am off to a slow start on the inside of the boat. Here the three layers of wood making up the inner gunwales are finished. I have slapped some fairing compound on the worst of the irregularities on the inside. After that I put two coats of epoxy over everything. Just in time because some of the recent heavy rains have started leaking through the roof and into the open container of my boat.
Next I will work on the breast works. ( the little piece that fits into the spot where the gunwales and stems meet. All the articles call for advanced carpentry skills at this stage. We will see.
Then the centerboard case.

Posted by Picasa

Thursday, June 23, 2011

Flipping the boat and a new bunch of challenges

Three of my neighbours came over and we carried the boat out of the tent and rolled it on the ground and put it back on the strongback.

I haven't got around to supporting it properly so that I can work inside. There were a few f--k ups revealed but nothing that a little loving care can't fix up or hide.

Everyone commented on how huge it seems inside. Today I will get it properly supported and put some temporary thwarts on it to line it up and support the sides. After that I will do some remedial work to the epoxy inside. There are a couple of screws that came through the stems that I have to deal with. I expect that these chores will eat up a lot of time.

Posted by Picasa

Sunday, June 19, 2011

finishing the outside hull

 An ordered workbench reflects an ordered mind.
 Here is the hull with two coats of epoxy on it.
 The ugly white stuff is the fairing compound cleaning up the scarf joints and screw holes. I put two layers of fairing compound on and sanded them smooth. If I was shooting for perfection I would still be messing around with fairing compound.

 Here is the hull with one coat of aklyd paint. This colour is Dory Buff. It was a popular colour in Newfoundland for finishing dorys.
 I think it will look alright after about three coats.
Next I will glue and screw a piece of slippery plastic on the bottom of the keel and then it will be time to flip the boat and tackle the wonders inside.

Saturday, June 11, 2011

shaping and glueing on the outer stems

Here I have made a little progress shaping the outer stems. They are ready for gluing. After the epoxy has dried I will fit on the keel. Once again I underestimated how long this would take.

Posted by Picasa

Sunday, June 5, 2011

Finished the planking

Last week I got the 13th and final plank glued on.
Now I have to tackle the outer keel pieces and fix up and finish the outer hull.

Thursday, January 20, 2011

Something got done during the cold snap

There has been a lot of minus 30 to 40 degree weather lately.
Managed to sew up the mizzen sail at home using my crap sewing machine. I realized to do the lug sail I would need more room and a decent sewing machine. I went to Paul's place and in two long days got the job done. Thanks Paul.
The sails are constructed from a Sailrite kit. It was very easy to work with and even an idiot like myself could figure out the comprehensive instructions.
Sorry no pics. Maybe when it warms up I will hang the Lug Sail from the roof edge and take some pictures.
Don't imagine anything much will happen in the next four months or so. Hope to get back on track in the late spring.

Tuesday, October 19, 2010

12th plank 6th of 7 rows finished

Forecast is for -10 degrees tonight. I might consider shutting the project down for the winter. I am surprised that the epoxy on this last plank is drying despite the cold weather. Think I will leave the clamps on for a good bit. As you can see I shortened the strongback in the front to make it easier to work on the bow. I disconnected the stern stem but quickly reattached it when the whole structure started to move around when I was planing the bevels on the planks.

Posted by Picasa