Have been scared off sailing by the strong winds we have been having for the last few days. What I want is a calm breeze so that I can go out and experiment with my new parel bead arrangement. Have discovered that the mast is raked to far aft. Hope to move it forward a bit in the next couple of days.
Here is a photo Glenn took in almost no wind on Launch Day #1
Trying to manufacture an Ian Oughtred designed Caledonia Yawl in the back yard.
Monday, September 17, 2012
Sunday, September 16, 2012
Another minor set back
So Doug and I take it for it's second launch. The new mast fits fine and everything is fine until we try to put the centerboard down. It takes a lot of effort to get it down and subsequently becomes jammed. Back to the beach where I jump out and drag it in despite the centerboard being down.
Any ways the next day I brought the boat back home, popped it off the trailer and was able to extract the centerboard by removing the top of the centerboard case.
As it turns out the centerboard had swelled up some and had developed a bit of nasty bow. With the help of a variety of power tools I did my best to make it look straight and remove some material. Then I saturated the whole thing with epoxy and one layer of cloth.
Yesterday I launched for third time in some nasty gusty winds on Lake Laberge.
I quickly realized I was over canvassed and undermanned. The main obstacle this time was the parel bead arrangement in lieu of a proper mast traveller which by the way I have ordered but don't expect to arrive any time soon. Any ways I finally gave up after having the triple reefed lug sail get hung up on the mast acting like a square spinnaker, with the boat going sideways on the brink of broaching.
Here are a few pictures.
Ever an optimist I will be heading out again as soon as conditions permit. We are supposed to have a week of pretty good weather.
Any ways the next day I brought the boat back home, popped it off the trailer and was able to extract the centerboard by removing the top of the centerboard case.
As it turns out the centerboard had swelled up some and had developed a bit of nasty bow. With the help of a variety of power tools I did my best to make it look straight and remove some material. Then I saturated the whole thing with epoxy and one layer of cloth.
Yesterday I launched for third time in some nasty gusty winds on Lake Laberge.
I quickly realized I was over canvassed and undermanned. The main obstacle this time was the parel bead arrangement in lieu of a proper mast traveller which by the way I have ordered but don't expect to arrive any time soon. Any ways I finally gave up after having the triple reefed lug sail get hung up on the mast acting like a square spinnaker, with the boat going sideways on the brink of broaching.
Here are a few pictures.
Ever an optimist I will be heading out again as soon as conditions permit. We are supposed to have a week of pretty good weather.
Wednesday, September 5, 2012
Some small set backs
So along with Glenn and Doug we launch the boat. Tied up to the dock, I notice the boat is filling with water.
Today I just finished constructing a new solid mast glued with epoxy. My next post will have some pics. Took me two and a half days to build. It is heavier but what the hell. Should be back on the water by Sunday.
Well it wasn't the end of the world. I raced back home for epoxy and supplies. About four hours later Glenn and I took it for it's inaugural sail. By this time the wind had died down but we got a taste of it. Another thing was that the boat rowed pretty well despite my set of unbalanced oars.
The next day Doug and I sailed downwind out of Jackfish Bay and shot off to the other side of Lake Laberge. We beached the boat for a while and admired what a great day it was.
Anyways to make the painful story short and sweet. We were tacking back and forth outside the entrance to Jackfish Bay when the wind came up. I am guessing 15 knots. I was trying to haul up the yard after putting a reef in the sail. The mainmast broke at at the partners. There was no time to start tearing out my hair as we had to row like mad to get into Jackfish Bay.
Here is the sad story. It seems the glue failed. Makes me wonder about the Mizzen Mast, Yard and Boom which were all constructed the same way.
Subscribe to:
Posts (Atom)